Довідник API для розробників v3

Починаємо

Для обробки запитів системою потрібен ключ API. Після реєстрації користувача ключ API автоматично створюється для цього користувача. Ключ API необхідно надсилати з кожним запитом (див. повний приклад нижче). Якщо ключ API не надіслано або термін його дії закінчився, виникне помилка. Щоб запобігти зловживанням, переконайтеся, що ваш ключ API зберігається в секреті.

Аутентифікація

Щоб пройти автентифікацію за допомогою системи API, вам потрібно надіслати ключ API як маркер авторизації з кожним запитом. Ви можете побачити зразок коду нижче.

curl --location --request POST 'https://wklej.to/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \ 
$curl = curl_init();
curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/url/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
    "Authorization: Bearer YOURAPIKEY",
    "Content-Type: application/json",
    ),
));

$response = curl_exec($curl);
Межа ставки

Наш API має обмежувач швидкості для захисту від сплеску запитів, щоб максимізувати його стабільність. Наш обмежувач швидкості зараз обмежений до 30 запитів на 1 хвилину.

Разом з відповіддю буде надіслано кілька заголовків, які можна буде перевірити, щоб визначити різну інформацію про запит.

X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Обробка відповідей

Усі відповіді API за замовчуванням повертаються у форматі JSON. Щоб перетворити це в дані, які можна використовувати, потрібно буде використовувати відповідну функцію відповідно до мови. У PHP функцію json_decode() можна використовувати для перетворення даних або в об’єкт (за замовчуванням) або в масив (встановити для другого параметра значення true). Дуже важливо перевірити ключ помилки, оскільки він надає інформацію про те, була помилка чи ні. Ви також можете перевірити код заголовка.

{
    "error": 1,
    "message": "An error ocurred"
}

Channels

List Channels
GET https://wklej.to/api/channels?limit=2&page=1

To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/channels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "channels": [
            {
                "id": 1,
                "name": "Channel 1",
                "description": "Description of channel 1",
                "color": "#000000",
                "starred": true
            },
            {
                "id": 2,
                "name": "Channel 2",
                "description": "Description of channel 2",
                "color": "#FF0000",
                "starred": false
            }
        ]
    }
}
List Channel Items
GET https://wklej.to/api/channel/:id?limit=1&page=1

To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/channel/:id?limit=1&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "items": [
            {
                "type": "links",
                "id": 1,
                "title": "My Sample Link",
                "preview": "https:\/\/google.com",
                "link": "https:\/\/wklej.to\/google",
                "date": "2022-05-12"
            },
            {
                "type": "bio",
                "id": 1,
                "title": "My Sample Bio",
                "preview": "https:\/\/wklej.to\/mybio",
                "link": "https:\/\/wklej.to\/mybio",
                "date": "2022-06-01"
            }
        ]
    }
}
Create a Channel
POST https://wklej.to/api/channel/add

A channel can be added using this endpoint.

ПараметрОпис
name (required) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request POST 'https://wklej.to/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/channel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Channel',
  'description' => 'my new channel',
  'color' => '#000000',
  'starred' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "id": 3,
    "name": "New Channel",
    "description": "my new channel",
    "color": "#000000",
    "starred": true
}
Assign an Item to a Channel
POST https://wklej.to/api/channel/:channelid/assign/:type/:itemid

An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.

ПараметрОпис
:channelid (required) Channel ID
:type (required) links or bio or qr
:itemid (required) Item ID
curl --location --request POST 'https://wklej.to/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/channel/:channelid/assign/:type/:itemid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Item successfully added to the channel."
}
Update Channel
PUT https://wklej.to/api/channel/:id/update

To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОпис
name (optional) Channel name
description (optional) Channel description
color (optional) Channel badge color (HEX)
starred (optional) Star the channel or not (true or false)
curl --location --request PUT 'https://wklej.to/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Acme Corp",
    "description": "channel for items for Acme Corp",
    "color": "#FFFFFF",
    "starred": false
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/channel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Acme Corp',
  'description' => 'channel for items for Acme Corp',
  'color' => '#FFFFFF',
  'starred' => false,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Channel has been updated successfully."
}
Delete Channel
DELETE https://wklej.to/api/channel/:id/delete

To delete a channel, you need to send a DELETE request. All items will be unassigned as well.

curl --location --request DELETE 'https://wklej.to/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/channel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Channel has been deleted successfully."
}

QR-коди

List QR codes
GET https://wklej.to/api/qr?limit=2&page=1

Щоб отримати свої QR-коди через API, ви можете використовувати цю кінцеву точку. Ви також можете фільтрувати дані (Див. таблицю для отримання додаткової інформації).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/qr?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "qrs": [
            {
                "id": 2,
                "link": "https:\/\/wklej.to\/qr\/a2d5e",
                "scans": 0,
                "name": "Google",
                "date": "2020-11-10 18:01:43"
            },
            {
                "id": 1,
                "link": "https:\/\/wklej.to\/qr\/b9edfe",
                "scans": 5,
                "name": "Google Canada",
                "date": "2020-11-10 18:00:25"
            }
        ]
    }
}
Отримайте один QR-код
GET https://wklej.to/api/qr/:id

Щоб отримати деталі для одного QR-коду через API, ви можете використовувати цю кінцеву точку.

curl --location --request GET 'https://wklej.to/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/qr/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "details": {
        "id": 1,
        "link": "https:\/\/wklej.to\/qr\/b9edfe",
        "scans": 5,
        "name": "Google Canada",
        "date": "2020-11-10 18:00:25"
    },
    "data": {
        "clicks": 1,
        "uniqueClicks": 1,
        "topCountries": {
            "Unknown": "1"
        },
        "topReferrers": {
            "Direct, email and other": "1"
        },
        "topBrowsers": {
            "Chrome": "1"
        },
        "topOs": {
            "Windows 10": "1"
        },
        "socialCount": {
            "facebook": 0,
            "twitter": 0,
            "instagram": 0
        }
    }
}
Створіть QR-код
POST https://wklej.to/api/qr/add

To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОпис
type (required) text | vcard | link | email | phone | sms | wifi
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request POST 'https://wklej.to/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/qr/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "id": 3,
    "link": "https:\/\/wklej.to\/qr\/a58f79"
}
Update QR Code
PUT https://wklej.to/api/qr/:id/update

Щоб оновити QR-код, вам потрібно надіслати дійсні дані в JSON через запит PUT. Дані мають бути надіслані як вихідний текст вашого запиту, як показано нижче. У прикладі нижче показано всі параметри, які ви можете надіслати, але ви не зобов’язані надсилати всі (Див. таблицю для отримання додаткової інформації).

ПараметрОпис
data (required) Data to be embedded inside the QR code. The data can be string or array depending on the type
background (optional) RGB color e.g. rgb(255,255,255)
foreground (optional) RGB color e.g. rgb(0,0,0)
logo (optional) Path to the logo either png or jpg
curl --location --request PUT 'https://wklej.to/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "link",
    "data": "https:\/\/google.com",
    "background": "rgb(255,255,255)",
    "foreground": "rgb(0,0,0)",
    "logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/qr/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'link',
  'data' => 'https://google.com',
  'background' => 'rgb(255,255,255)',
  'foreground' => 'rgb(0,0,0)',
  'logo' => 'https://site.com/logo.png',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "QR has been updated successfully."
}
Видалити QR-код
DELETE https://wklej.to/api/qr/:id/delete

Щоб видалити QR-код, потрібно надіслати запит DELETE.

curl --location --request DELETE 'https://wklej.to/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/qr/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "QR Code has been deleted successfully."
}

Користувацький сплеск

List Custom Splash
GET https://wklej.to/api/splash?limit=2&page=1

To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/splash?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "splash": [
            {
                "id": 1,
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "name": "Product 2 Promo",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Накладання CTA

List CTA Overlays
GET https://wklej.to/api/overlay?limit=2&page=1

To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/overlay?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "cta": [
            {
                "id": 1,
                "type": "message",
                "name": "Product 1 Promo",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "contact",
                "name": "Contact Page",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}

Посилання


Пікселі

List Pixels
GET https://wklej.to/api/pixels?limit=2&page=1

To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/pixels?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "pixels": [
            {
                "id": 1,
                "type": "gtmpixel",
                "name": "GTM Pixel",
                "tag": "GA-123456789",
                "date": "2020-11-10 18:00:00"
            },
            {
                "id": 2,
                "type": "twitterpixel",
                "name": "Twitter Pixel",
                "tag": "1234567",
                "date": "2020-11-10 18:10:00"
            }
        ]
    }
}
Create a Pixel
POST https://wklej.to/api/pixel/add

A pixel can be created using this endpoint. You need to send the pixel type and the tag.

ПараметрОпис
type (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok
name (required) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request POST 'https://wklej.to/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "gtmpixel",
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/pixel/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'gtmpixel',
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "id": 1
}
Оновіть Pixel
PUT https://wklej.to/api/pixel/:id/update

To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОпис
name (optional) Custom name for your pixel
tag (required) The tag for the pixel
curl --location --request PUT 'https://wklej.to/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "My GTM",
    "tag": "GTM-ABCDE"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/pixel/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'My GTM',
  'tag' => 'GTM-ABCDE',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Pixel has been updated successfully."
}
Delete Pixel
DELETE https://wklej.to/api/pixel/:id/delete

To delete a pixel, you need to send a DELETE request.

curl --location --request DELETE 'https://wklej.to/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/pixel/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Pixel has been deleted successfully."
}

Рахунок

Отримати обліковий запис
GET https://wklej.to/api/account

Щоб отримати інформацію про обліковий запис, ви можете надіслати запит на цю кінцеву точку, і вона поверне дані про обліковий запис.

curl --location --request GET 'https://wklej.to/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/account",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "data": {
        "id": 1,
        "email": "[email protected]",
        "username": "sampleuser",
        "avatar": "https:\/\/domain.com\/content\/avatar.png",
        "status": "pro",
        "expires": "2022-11-15 15:00:00",
        "registered": "2020-11-10 18:01:43"
    }
}
Оновити обліковий запис
PUT https://wklej.to/api/account/update

Щоб оновити інформацію про обліковий запис, ви можете надіслати запит на цю кінцеву точку, і вона оновить дані облікового запису.

curl --location --request PUT 'https://wklej.to/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "email": "[email protected]",
    "password": "newpassword"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/account/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'email' => '[email protected]',
  'password' => 'newpassword',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Account has been successfully updated."
}

Фірмовані домени

List Branded Domains
GET https://wklej.to/api/domains?limit=2&page=1

To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/domains?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "domains": [
            {
                "id": 1,
                "domain": "https:\/\/domain1.com",
                "redirectroot": "https:\/\/rootdomain.com",
                "redirect404": "https:\/\/rootdomain.com\/404"
            },
            {
                "id": 2,
                "domain": "https:\/\/domain2.com",
                "redirectroot": "https:\/\/rootdomain2.com",
                "redirect404": "https:\/\/rootdomain2.com\/404"
            }
        ]
    }
}
Create a Branded Domain
POST https://wklej.to/api/domain/add

A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.

ПараметрОпис
domain (required) Branded domain including http or https
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request POST 'https://wklej.to/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "domain": "https:\/\/domain1.com",
    "redirectroot": "https:\/\/rootdomain.com",
    "redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/domain/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'domain' => 'https://domain1.com',
  'redirectroot' => 'https://rootdomain.com',
  'redirect404' => 'https://rootdomain.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "id": 1
}
Оновити домен
PUT https://wklej.to/api/domain/:id/update

To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОпис
redirectroot (optional) Root redirect when someone visits your domain
redirect404 (optional) Custom 404 redirect
curl --location --request PUT 'https://wklej.to/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "redirectroot": "https:\/\/rootdomain-new.com",
    "redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/domain/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'redirectroot' => 'https://rootdomain-new.com',
  'redirect404' => 'https://rootdomain-new.com/404',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Domain has been updated successfully."
}
Delete Domain
DELETE https://wklej.to/api/domain/:id/delete

To delete a domain, you need to send a DELETE request.

curl --location --request DELETE 'https://wklej.to/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/domain/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Domain has been deleted successfully."
}

кампанії

List Campaigns
GET https://wklej.to/api/campaigns?limit=2&page=1

To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).

ПараметрОпис
limit (optional) Per page data result
page (optional) Current page request
curl --location --request GET 'https://wklej.to/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/campaigns?limit=2&page=1",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": "0",
    "data": {
        "result": 2,
        "perpage": 2,
        "currentpage": 1,
        "nextpage": 1,
        "maxpage": 1,
        "campaigns": [
            {
                "id": 1,
                "name": "Sample Campaign",
                "public": false,
                "rotator": false,
                "list": "https:\/\/domain.com\/u\/admin\/list-1"
            },
            {
                "id": 2,
                "domain": "Facebook Campaign",
                "public": true,
                "rotator": "https:\/\/domain.com\/r\/test",
                "list": "https:\/\/domain.com\/u\/admin\/test-2"
            }
        ]
    }
}
Створіть кампанію
POST https://wklej.to/api/campaign/add

A campaign can be added using this endpoint.

ПараметрОпис
name (optional) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request POST 'https://wklej.to/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "New Campaign",
    "slug": "new-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/campaign/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'New Campaign',
  'slug' => 'new-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "id": 3,
    "domain": "New Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/new-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
POST https://wklej.to/api/campaign/:campaignid/assign/:linkid

A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.

curl --location --request POST 'https://wklej.to/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/campaign/:campaignid/assign/:linkid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Link successfully added to the campaign."
}
Оновити кампанію
PUT https://wklej.to/api/campaign/:id/update

To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).

ПараметрОпис
name (required) Campaign name
slug (optional) Rotator Slug
public (optional) Access
curl --location --request PUT 'https://wklej.to/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "name": "Twitter Campaign",
    "slug": "twitter-campaign",
    "public": true
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/campaign/:id/update",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'name' => 'Twitter Campaign',
  'slug' => 'twitter-campaign',
  'public' => true,
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "id": 3,
    "domain": "Twitter Campaign",
    "public": true,
    "rotator": "https:\/\/domain.com\/r\/twitter-campaign",
    "list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
Delete Campaign
DELETE https://wklej.to/api/campaign/:id/delete

To delete a campaign, you need to send a DELETE request.

curl --location --request DELETE 'https://wklej.to/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/campaign/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "Campaign has been deleted successfully."
}

Користувачі

До цієї кінцевої точки доступні лише користувачі з правами адміністратора.

List Users
GET https://wklej.to/api/users?filter=free

Отримайте список усіх користувачів платформи. Дані можна відфільтрувати, надіславши параметр фільтра в URL-адресу.

ПараметрОпис
filter admin | free | pro
email Search a user by email
curl --location --request GET 'https://wklej.to/api/users?filter=free' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/users?filter=free",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "email": "[email protected]",
            "username": "sample2user",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
            "status": "free",
            "planid": 1,
            "expires": null,
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        },
        {
            "id": 1,
            "email": "[email protected]",
            "username": "sampleuser",
            "avatar": "https:\\\/\\\/domain.com\/content\/avatar.png",
            "status": "pro",
            "planid": 2,
            "expires": "2022-11-15 15:00:00",
            "registered": "2020-11-10 18:01:43",
            "apikey": "ABC123DEF456"
        }
    ]
}
List a Single User
GET https://wklej.to/api/user/:id

Get data for a single user.

curl --location --request GET 'https://wklej.to/api/user/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/user/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "data": {
        "id": 2,
        "email": "[email protected]",
        "username": "sample2user",
        "avatar": "https:\\\/\\\/domain.com\/content\/avatar2.png",
        "status": "free",
        "planid": 1,
        "expires": null,
        "registered": "2020-11-10 18:01:43",
        "apikey": "ABC123DEF456"
    }
}
Create User
POST https://wklej.to/api/user/add

Щоб створити користувача, скористайтеся цією кінцевою точкою та надішліть таку інформацію як JSON.

ПараметрОпис
username (required) User's username. Needs to be valid.
email (required) User's email. Needs to be valid.
password (required) User's password. Minimum 5 characters.
planid (optional) Premium plan. This can be found in the admin panel.
expiration (optional) Membership expiration example 2020-12-26 12:00:00
curl --location --request POST 'https://wklej.to/api/user/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "username": "user",
    "password": "1234567891011",
    "email": "[email protected]",
    "planid": 1,
    "expiration": "2020-11-20 11:00:00"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/user/add",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "POST",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'username' => 'user',
  'password' => '1234567891011',
  'email' => '[email protected]',
  'planid' => 1,
  'expiration' => '2020-11-20 11:00:00',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "User has been registered.",
    "data": {
        "id": 3,
        "email": "[email protected]",
        "username": "user"
    }
}
Delete User
DELETE https://wklej.to/api/user/:id/delete

Щоб видалити користувача, використовуйте цю кінцеву точку.

curl --location --request DELETE 'https://wklej.to/api/user/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/user/:id/delete",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "DELETE",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "User has been deleted."
}
Login User
GET https://wklej.to/api/user/login/:id

This endpoint will generate a unique link that will allow the user to automatically login to the platform. SSO login urls are valid for 1 hour and they can be used a single time.

curl --location --request GET 'https://wklej.to/api/user/login/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/user/login/:id",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "url": "https:\/\/wklej.to\/user\/login\/sso\/krjivgxdlgwwxalsvvmvjdcgxbloipjb"
}

Плани

До цієї кінцевої точки доступні лише користувачі з правами адміністратора.

List Plans
GET https://wklej.to/api/plans

Отримайте список усіх планів на платформі.

curl --location --request GET 'https://wklej.to/api/plans' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/plans",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "GET",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "data": [
        {
            "id": 2,
            "name": "Business",
            "free": false,
            "prices": {
                "monthly": 9.99,
                "yearly": 99.99,
                "lifetime": 999.99
            },
            "limits": {
                "links": 100,
                "clicks": 100000,
                "retention": 60,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "1",
                    "count": "5"
                },
                "overlay": {
                    "enabled": "1",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "1",
                    "count": "10"
                },
                "domain": {
                    "enabled": "1",
                    "count": "1"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "1"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        },
        {
            "id": 1,
            "name": "Starter",
            "free": true,
            "prices": null,
            "limits": {
                "links": 10,
                "clicks": 1000,
                "retention": 7,
                "custom": {
                    "enabled": "0"
                },
                "team": {
                    "enabled": "0",
                    "count": "0"
                },
                "splash": {
                    "enabled": "0",
                    "count": "0"
                },
                "overlay": {
                    "enabled": "0",
                    "count": "10"
                },
                "pixels": {
                    "enabled": "0",
                    "count": "10"
                },
                "domain": {
                    "enabled": "0",
                    "count": "0"
                },
                "multiple": {
                    "enabled": "0"
                },
                "alias": {
                    "enabled": "0"
                },
                "device": {
                    "enabled": "0"
                },
                "geo": {
                    "enabled": "0"
                },
                "bundle": {
                    "enabled": "0"
                },
                "parameters": {
                    "enabled": "0"
                },
                "export": {
                    "enabled": "0"
                },
                "api": {
                    "enabled": "0"
                }
            }
        }
    ]
}
Subscribe a User to a Plan
PUT https://wklej.to/api/plan/:planid/user/:userid

Щоб підписати користувача на план, надішліть запит PUT на цю кінцеву точку з ідентифікатором плану та ідентифікатором користувача. Необхідно вказати тип підписки та термін її дії. Якщо термін придатності не вказано, дата буде скоригована відповідно до типу.

ПараметрОпис
type monthly | yearly | lifetime
expiration (необов’язково) Дата закінчення терміну дії плану, напр.2023-01-02 21:42:02
curl --location --request PUT 'https://wklej.to/api/plan/:planid/user/:userid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
    "type": "monthly",
    "expiration": "2023-01-02 21:42:02"
}'
$curl = curl_init();

curl_setopt_array($curl, array(
    CURLOPT_URL => "https://wklej.to/api/plan/:planid/user/:userid",
    CURLOPT_RETURNTRANSFER => true,
    CURLOPT_ENCODING => "",
    CURLOPT_MAXREDIRS => 2,
    CURLOPT_TIMEOUT => 10,
    CURLOPT_FOLLOWLOCATION => true,
    CURLOPT_CUSTOMREQUEST => "PUT",
    CURLOPT_HTTPHEADER => array(
        "Authorization: Bearer YOURAPIKEY",
        "Content-Type: application/json",
    ),
    CURLOPT_POSTFIELDS => json_encode(array (
  'type' => 'monthly',
  'expiration' => '2023-01-02 21:42:02',
)),
));

$response = curl_exec($curl);

curl_close($curl);
echo $response;
Відповідь сервера
{
    "error": 0,
    "message": "User has been subscribed to this plan."
}